Osisko Development Announces Initial Mineral Resource Estimate For Trixie, Tintic Project

Chris Lodder, President of Osisko Development commented, "The initial Trixie MRE reflects a very limited footprint of the historically defined mineralized zones at Trixie and was delineated within only six months of the acquisition of the project. It exhibits outstanding precious metal grade potential within the structural corridors of the host quartzite and based on all data received and compiled to date we see potential to continue to extend mineralization at depth and on strike throughout and parallel to the historic mine footprint as well as repeats at several other prospects and past producers in the East Tintic District. This resource will assist the Company with its near-term exploration and operational planning."

TRIXIE MINERAL RESOURCE ESTIMATE

• The Trixie MRE comprises five mineralized zones within the greater Trixie deposit, including T1, T2, T3, T4 and 75-85 zones over a strike length of 610 meters ("m"), a maximum width of 105 m and to a maximum depth of 295 m.
• The Trixie MRE is based on 4,467 underground chip samples, 4,780.1 m of current and verified historic drilling in 50 holes, of which 3,228.9 m of drilling in 23 holes were drilled by the Company in 2022.
• Gold mineralization is associated with high sulphidation epithermal mineralization, structurally controlled, and hosted within the quartzites. Mineralization consists of native Au, and rare Au-Ag rich telluride minerals with quartz and quartz-barite-sulphosalt stockwork veining.

TRIXIE TEST MINE OPERATIONAL ACTIVITIES

• Approximately 50% of the 1,390 meter (4,550 ft.) Trixie portal underground decline ramp has been completed to date. On track to reach the 625 level by the second quarter of 2023.
• The decline will significantly improve access to the underground workings, expand potential underground exploration target areas and provide sufficient flexibility to complete additional programs targeting mineral resource growth potential beyond the 625 level.
• Excavation of deeper underground levels is anticipated to continue in the second half of 2023 and beyond, to facilitate deployment of mechanized mining equipment and to increase the overall potential mining rate capacity of the operation currently constrained by a single shaft.
• Target to ramp up processing capacity to 500 short tons per day by the end of 2023.
• To achieve higher operating rates, certain existing processing infrastructure at the Burgin mill will need to be upgraded and/or amended, including the construction of a new mill facility to support higher processing rates.
• During this time, it is anticipated that VAT leach processing and certain small scale underground test mining activities will be temporarily suspended while the Company focuses its efforts on fast tracking the mill expansion, accelerating decline development, and refurbishing existing surface and underground infrastructure in preparation for higher operating rates. 
• Underground activities will continue to focus on exploration development along the 625 level to the Sioux-Ajax Fault, following identified mineralized zones, and on building a stockpile of mineralized material to provide operational flexibility during the commissioning phase of the upgraded mill facility.
• The Company expects to advance rehabilitation of the Trixie shaft and the 750 level to allow for further underground sampling and diamond drilling. There are currently two underground diamond drills operating on the 625 level. 

Qualified Persons

The scientific and technical information contained in this news release has been reviewed and approved by Maggie Layman, P.Geo., Vice President, Exploration of Osisko Development, and a "qualified person" ("QP") within the meaning of NI 43-101.

The independent QPs for the Trixie MRE, as defined by NI 43-101, are William Lewis, P.Geo. and Alan S. J. San Martin AusIMM(CP) of Micon International Limited. Each of the QPs is independent of Osisko Development and has reviewed and approved the content in this news release.

Quality Assurance (QA) – Quality Control (QC)

True width determination is estimated to be approximately 0.3 m to 2.4 m (1 to 8 ft.) wide for the T2 structure and approximately 3 m to 25 m (10 to 80 ft.) for the T4 mineralized stockwork zone located in the hanging wall of the T2 structure. All underground face samples are collected by TCM geologists from each of the active mining faces, with samples transported by the geologists from Trixie to the on-site TCM laboratory located at the Burgin administrative complex. Underground samples are dried, crushed to <10 mm and a 250 g split is taken. The split is pulverized, and a 30 g Fire Assay with gravimetric finish is completed to determine gold and silver grades, reported in oz/short ton and g/t.

The TCM Burgin laboratory is not a certified analytical laboratory, however, the facility is managed by a qualified Laboratory Manager with annual auditing by technical staff. Inter-laboratory check assays using ALS Laboratory as a third-party independent analysis of samples is routinely carried out as part of ongoing Quality Assurance-Quality Control ("QA/QC") work. Certified OREAS QC standards and blanks are inserted at regular intervals in the sample stream to monitor laboratory performance.

All drill core and exploration samples are dispatched to ALS Laboratory for offsite sample preparation and analysis. Samples are assigned a unique sample ID. All geological and sampling information is entered into Datamine Fusion database. Core is sawn in half and half are sampled. Certified standards and blanks inserted into all sample dispatches. Samples are collected by Old Dominion Transportation and dispatched to ALS Laboratory in Reno, NV. Sample submission forms accompany the samples, and digital copies emailed to ALS.

All sample preparation is completed by ALS, including crushing and pulverizing (Prep31) of samples. Analytical assays include gold and silver by fire assay of 50 g sample with AAS finish (Au-AA26), over limits by gravimetric analysis (Au-Grav22). Multi element analysis is by four acid digest (ME-MS61). The pulps are returned to Osisko Development and coarse rejects are disposed after 90 days. Assays are reported to Osisko Development, and then loaded into Datamine Fusion, QA/QC samples are checked, and assays merged with sample information for future reporting.

About Osisko Development Corp.

Osisko Development Corp. is a premier North American gold development company focused on high-quality past-producing properties located in mining friendly jurisdictions with district scale potential. The Company’s objective is to become an intermediate gold producer by advancing its 100%-owned Cariboo Gold Project, located in central B.C., Canada, the recently acquired Tintic Project in the historic East Tintic mining district in Utah, U.S.A., and the San Antonio Gold Project in Sonora, Mexico. In addition to considerable brownfield exploration potential of these properties, that benefit from significant historical mining data, existing infrastructure and access to skilled labour, the Company’s project pipeline is complemented by other prospective exploration properties. The Company’s strategy is to develop attractive, long-life, socially and environmentally sustainable mining assets, while minimizing exposure to development risk and growing mineral resources.

For further information, please contact Osisko Development Corp.:

Sean Roosen

Chairman and CEO

Email: sroosen@osiskodev.com

Tel: +1 (514) 940-0685

Philip Rabenok

Director, Investor Relations

Email: prabenok@osiskodev.com

Tel: +1 (437) 423-3644

In Europe:

Swiss Resource Capital AG

Jochen Staiger

info@resource-capital.ch

www.resource-capital.ch

CAUTIONARY STATEMENTS

Cautionary Statement Regarding Estimates of Mineral Resources

This news release uses the terms measured, indicated and inferred mineral resources as a relative measure of the level of confidence in the resource estimate. Readers are cautioned that mineral resources are not mineral reserves and that the economic viability of resources that are not mineral reserves has not been demonstrated. The mineral resource estimate disclosed in this news release may be materially affected by geology, environmental, permitting, legal, title, socio-political, marketing or other relevant issues. The mineral resource estimate is classified in accordance with the Canadian Institute of Mining, Metallurgy and Petroleum’s "CIM Definition Standards on Mineral Resources and Mineral Reserves" incorporated by reference into NI 43-101. Under NI 43-101, estimates of inferred mineral resources may not form the basis of feasibility or pre-feasibility studies or economic studies except for preliminary economic assessments. Readers are cautioned not to assume that further work on the stated resources will lead to mineral reserves that can be mined economically.

Cautionary Statement Regarding Test Mining Without Feasibility Study

The Company cautions that the decision to commence small-scale underground mining activities and batch vat leaching at the Trixie test mine has been made without the benefit of a feasibility study, or reported mineral resources or mineral reserves, demonstrating economic and technical viability, and, as a result there may be increased uncertainty of achieving any particular level of recovery of material or the cost of such recovery. The Company cautions that historically, such projects have a much higher risk of economic and technical failure. There is no guarantee that production will continue as anticipated or at all or that anticipated production costs will be achieved. The failure to continue production may have a material adverse impact on the Company’s ability to generate revenue and cash flow to fund operations. Failure to achieve the anticipated production costs may have a material adverse impact on the Company’s cash flow and potential profitability. In continuing current operations at Trixie after closing, the Company will not be basing its decision to continue such operations on a feasibility study, or reported mineral resources or mineral reserves demonstrating economic and technical viability. The Company cautions that mining at Trixie could be suspended at any time.

Cautionary Statement to U.S. Investors

The Company is subject to the reporting requirements of the applicable Canadian securities laws, and as a result reports information regarding mineral properties, mineralization and estimates of mineral reserves and mineral resources, including the information in the Tintic Technical Report and this news release, in accordance with Canadian reporting requirements, which are governed by NI 43-101. As such, such information concerning mineral properties, mineralization and estimates of mineral reserves and mineral resources, including the information in the Tintic Technical Report and this news release, is not comparable to similar information made public by U.S. companies subject to the reporting and disclosure requirements of the U.S. Securities and Exchange Commission ("SEC").

FORWARD LOOKING STATEMENTS

Certain statements contained in this news release may be deemed "forward-looking statements" within the meaning of the United States Private Securities Litigation Reform Act of 1995 and "forward-looking information" within the meaning of applicable Canadian securities legislation. These forward‐looking statements, by their nature, require Osisko Development to make certain assumptions and necessarily involve known and unknown risks and uncertainties that could cause actual results to differ materially from those expressed or implied in these forward‐looking statements. Forward‐looking statements are not guarantees of performance. Words such as "may", "will", "would", "could", "expect", "believe", "plan", "anticipate", "intend", "estimate", "continue", or the negative or comparable terminology, as well as terms usually used in the future and the conditional, are intended to identify forward‐looking statements. Information contained in forward‐looking statements is based upon certain material assumptions that were applied in drawing a conclusion or making a forecast or projection, including management’s perceptions of historical trends, current conditions and expected future developments; the utility and significance of historic data, including the significance of the district hosting past producing mines; the unique mineralization at Trixie; the potential of high grade gold mineralization on Trixie; the results (if any) of further exploration work to define and expand mineral resources; the ability of exploration work (including drilling) to accurately predict mineralization; the ability to generate additional drill targets; the ability of management to understand the geology and potential of Trixie; the timing and ability of the Company to produce the Trixie MRE (or any subsequent MRE) (if at all); the information and the scope of the contemplated Trixie MRE (and any subsequent MRE); the impact of the Trixie MRE; the ability of the Company to complete its exploration objectives in 2023 in the timing contemplated (if at all); the ongoing advancement of the Trixie decline; the deposit remaining open for expansion at depth and down plunge; the ability to realize upon any mineralization in a manner that is economic; as well as other considerations that are believed to be appropriate in the circumstances, and any other information herein that is not a historical fact may be "forward looking information". Material assumptions also include, management’s perceptions of historical trends, the ability of exploration (including drilling) to accurately predict mineralization, budget constraints and access to capital on terms acceptable to the Company, current conditions and expected future developments, results of further exploration work to define or expand any mineral resources, the ability to continue production at Trixie, as well as other considerations that are believed to be appropriate in the circumstances. Osisko Development considers its assumptions to be reasonable based on information currently available, but cautions the reader that their assumptions regarding future events, many of which are beyond the control of Osisko Development, may ultimately prove to be incorrect since they are subject to risks and uncertainties that affect Osisko Development and its business. Such risks and uncertainties include, among others, risks relating to capital market conditions and the Company’s ability to access capital on terms acceptable to the Company for the contemplated exploration and development at Tintic; the ability to continue current operations and exploration; regulatory framework; the ability of exploration activities (including drill results) to accurately predict mineralization; errors in management’s geological modelling; the ability to expand operations or complete further exploration activities, including drilling; property and stream interests in the Tintic Project; the ability of the Company to obtain required approvals; the results of exploration activities; risks relating to exploration, development and mining activities; the global economic climate; metal prices; dilution; environmental risks; and community and non-governmental actions and the responses of relevant governments to the COVID-19 outbreak and the effectiveness of such responses. Readers are urged to consult the disclosure provided under the heading "Risk Factors" in the Company’s annual information form for the year ended December 31, 2021, as amended, which has been filed on SEDAR (www.sedar.com) under Osisko Development’s issuer profile and on the SEC’s EDGAR website (www.sec.gov), for further information regarding the risks and other factors applicable to the exploration results. Although the Company’s believes the expectations conveyed by the forward-looking statements are reasonable based on information available at the date of preparation, no assurances can be given as to future results, levels of activity and achievements. The Company disclaims any obligation to update any forward-looking statements, whether as a result of new information, future events or results or otherwise, except as required by law. There can be no assurance that these forward-looking statements will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release. No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein.