The rise of the 5th generation of DRAM modules, DDR5, has brought forth several substantial advancements in memory module technology offering vital advantages that significantly impact memory performance and efficiency.
Notably, the most substantial improvement in DDR5 lies in its increased capacity and bandwidth, enabling the new generation of memory modules to handle larger data volumes at higher speeds, resulting in enhanced memory access and data processing capabilities. Innodisk DDR5 5600 series takes the technology one step forward, featuring a maximum module capacity of 48GB, representing a 16GB increase compared to its predecessor, the DDR5 4800 — additionally, the maximum IC capacity is 24GB (compared to DDR5 4800’s 16GB). The DDR5 5600 series also stands out in data transfer speed, reaching 5600MT/S, notably higher than the DDR5 4800 series‘ 4800MT/S. This improvement will reduce memory access latency and enhance productivity across various computing workloads.
DDR5 features a built-in Power Management IC (PMIC) to JEDEC standard at 1.1V, regulating power for improved signal integrity for each component within the module, encompassing the DRAM, register, and SPD hub. The lower voltage reduces power consumption per module, benefiting large-scale deployments. DDR5’s advanced power management enables a "deep sleep" state during idle periods, further conserving power and reducing heat generation.
Incorporating onboard PMIC and SPD design into the DDR5 module has enhanced power management capabilities, resulting in increased complexity. To ensure the stability and compatibility of their DDR5 products, Innodisk has undertaken comprehensive cross-validations for each essential component.
Another difference between DDR4 and DDR5 is the on-die ECC function within the DRAM IC itself to prevent data reliability concerns. However, the On-die ECC function inside of the IC should not be confused with the ECC function of ECC DIMM or RDIMM modules, which prevents bit errors from occurring between the memory module and CPU by using an additional IC on the DRAM module. Innodisk DDR5 5600 series are also available as ECC UDIMM and ECC SODIMM form factor.
In conclusion, adopting DDR5 technology is a strategic move in the era of Industry 4.0 and the Intelligent Edge. As Edge deployments evolve, the need for high-performing memory and storage solutions becomes increasingly critical for processing data at its source. In many scenarios, the latency and cost associated with cloud data center processing are not feasible.
The Innodisk DDR5 5600 series showcases noteworthy improvements in capacity, speed, and reliability. Additionally, manufactured using the highest quality components, the DDR5 5600 series has an operating temperature range from 0 °C to +95 °C and resistors protected against sulfur contamination, assuring the requirements for industrial-grade memory performance and extended life spans in demanding environments. DDR5 5600 is available in UDIMM and SODIMM form factor.
Innodisk introduces the DR5600 series, a cutting-edge industrial-grade DDR5 memory module, catering to the growing demand for high-performance memory in the AIoT industry. With a 16% increase in bandwidth and a capacity of up to 48GB, this DDR5 series offers improved efficiency and data analysis for AI applications. The DDR5’s enhanced capacity and data transfer speed significantly enhance memory access and data processing capabilities, making it a crucial upgrade from DDR4 for unlocking the full potential of AI’s transformative capabilities.
#DDR5 #AIoT #Innodisk #IndustrialMemory #DataProcessing #AI #Industry40 #IntelligentEdge
Innodisk LinkedIn
As the AIoT industry continues to advance, data takes center stage, driving innovation and growth. In this era of soaring demand for AI industrial applications, the significance of high-performing memory cannot be overstated. We are delighted to introduce Innodisk’s industrial-grade DR5600 series, engineered to deliver enhanced memory access and data processing capabilities.
Key Features of Innodisk DDR5 5600 Series:
• Unmatched Capacity: Enjoy a maximum module capacity of 48GB, a remarkable 16GB more than its predecessor, DDR5 4800.
• Expanded IC density: With a maximum IC density of 24GB (compared to DDR5 4800’s 16GB), experience seamless performance even with massive workloads.
• Lightning-Fast Speed: At 5600MT/S, our DDR5 5600 series outperforms DDR5 4800, significantly reducing memory access latency and boosting overall productivity.
• Versatility in Form Factors:
The Innodisk DDR5 5600 series is available in ECC UDIMM and ECC SODIMM form factors, catering to diverse industrial applications and meeting various system requirements.
Contact us today at eusales@innodisk.com for our industrial-grade memory solutions. Or visit our website for our full product portfolio: https://bit.ly/3KcshAf
#DDR5 #AIoT #Innodisk #IndustrialMemory #DataProcessing #AI #Industry40 #IntelligentEdge
Innodisk Europe B.V.
Pisanostraat 57
NL5623CB Eindhoven
Telefon: +49 (152) 5100 6027
http://www.innodisk.com/
Marketing Specialist
E-Mail: diana_dobrescu@innodisk.com
Marcom360
Telefon: +49 (7083) 933745
E-Mail: edgar.huber@marcom360.de