Six grinding machines and three milling machines make up LISSMAC’s powerful new product family, designed for a wide range of tillage tasks from quick-fix repairs to demanding large-scale operations. At the start of production, a comprehensive selection of tools is already available that are precisely matched to the machines and their intended use and ensure maximum efficiency and reliability. The all-in-one range is rounded off by the VACUUM-DRY industrial hoovers in two performance levels. Equipped with HEPA filters + PTFE, they meet dust class H and achieve air flows of 340 m³/h and 510 m³/h respectively.
Smooth and non-slip – the new BSM floor grinding machines
With six models ranging from 2.2 kW to 11 kW of high-torque electric power and working widths of 270 mm to 650 mm, the floor grinding machines from LISSMAC handle the majority of tasks that arise in professional floor preparation. The LISSMAC diamond tools, which are carefully matched to the machines in different grit sizes and segment hardnesses, produce first-class surfaces on floors such as concrete, screed or terrazzo and score points with long service lives. The stick roller system creates a roughened sansurface similar to shot peening. High-quality visible surfaces can be created or renovated in a short time with the diamond polishing pads. The LISSMAC PCD tools effectively remove adhesives, paints or coatings from surfaces.
The handy floor sanding machine BSM 270 E with 2.2 kW 230 V motor and 270 mm working width inspires anew every day as a nimble all-rounder for the high-abrasive subfloor preparation of floors. Super light, super powerful and super fast is the BSM 310 E with a particularly durable brushless 230 V motor, 310 mm working width and 38 kg operating weight. The BSM 340 E with its speed-regulated, 5.5 kW 400 V motor and 340 mm working width is recommended for coarse work with high removal rates. An economical solution for all cases, equally efficient for dry applications, is the BSM 450 E 3-disc sanding machine with an impressive 450 mm working width and 230 V motor with 2.2 kW. The BSM 525 E with its speed-regulated, 7.5 kW 400 V motor, trimmed for maximum performance, really puts the pressure on when it comes to demanding dry and wet sanding. The working width of the 3-disc sanding machine is 525 mm. Flagship performance on a 650 mm working width is delivered by the BSM 650 E with 11 kW engine, which powerfully pulls through the adjustable speed even on rough jobs. The weight of the heavy floor grinder is optimally balanced for high stock removal and energy-saving operation during long operations. All LISSMAC floor sanding machines are characterised by the fact that they are also ideally suited for work close to walls.
Good from the ground up – the new BFM floor milling machines
With cracks, blisters, chipping and increased susceptibility to weathering, the costly consequences of inadequate substrate preparation inevitably come to light sooner or later. The new LISSMAC floor milling machines produce a high adhesive tensile strength on concrete and screed surfaces and thus prepare the load-bearing basis for further floor construction. The powerful and robust machines compensate for height differences of up to 8 mm and efficiently remove adhesives, paints as well as foam residues from floors. Three practically graded machine sizes deliver solid performance day after day on 200 mm to 320 mm working widths. The LISSMAC tools, which are precisely tailored to the market requirements, convince with an attractive price-performance ratio, ensure first-class surface quality and guarantee long tool lives.
The BFM 200 E proves itself as a compact universal machine, which, for all its manageability, also comes up trumps with performance and durability – the classic LISSMAC virtues. Driven by a 2.2 kW 230 V motor, it achieves milling depths of up to 2 mm with a working width of 200 mm. The BFM 250 E is still compact and easy to use, but is in a whole new performance class. Its 4 kW 400 V motor provides the power and endurance for demanding applications with a maximum milling depth of 5 mm over a working width of 250 mm. Large areas and the most demanding tasks are the métier of the BFM 320 E, the largest floor milling machine from LISSMAC with a working width of 320 mm, which can be converted to a diamond milling machine with 24 diamond blades in a short time. Driven by an 11 kW 400 V motor, it mills up to 8 mm deep on concrete C20/25 in one operation. Equipped with a stepless hydrostatic drive for forward and reverse travel, the ergonomically designed machine protects the operator’s strength during continuous operation.
Further information at: www.lissmac.com
LISSMAC Maschinenbau GmbH
Lanzstraße 4
88410 Bad Wurzach
Telefon: +49 (7564) 307-0
Telefax: +49 (7564) 307-500
http://www.lissmac.com
Telefon: +49 (7564) 307-248
Fax: +49 (7564) 307-500
E-Mail: V.Frey@lissmac.com